Results 1 to 3 of 3

Thread: Need Some Help

  1. #1
    Senior Hostboard Member CROM's Avatar
    Join Date
    July 17th, 1999
    Posts
    1,202
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Hey Guys, long time no talk. Need some help on the teg.

    I am throwing CODES - 45 and 67

    Code 45 - System Too Lean/System Too Rich
    Code 67 - Catalyst System Efficiency Below Threshold

    Anyone have experience with these problems and have fixed them? I replaced my 02's a few months ago. Thanks!!

  2. #2
    Inactive Member 01TypeR's Avatar
    Join Date
    December 7th, 2004
    Posts
    4
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Code 67 - Catalyst System Efficiency Below Threshold
    Your Catalytic Converter is dead. I got this code, replaced the cat with a Carsound high-flow cat, and the code magically went away. What this code means is that your mostly-useless secondary o2 sensor is reading that there's a lot of unburnt fuel still present in the exhaust, meaning that the catalytic converter isn't doing its job. Thus, the system efficiency is below threshold.


    Code 45 - System Too Lean/System Too Rich
    First, lets look at why your catalytic converter died, because it should last a while.

    If you read this article on Team-Integra.net, it will say:

    <u>Excess Fuel Overheating The Catalytic Converter</u>

    An engine that is performing at peak efficiency will burn all the fuel in the combustion chamber during the combustion process. An engine that is not performing properly, that is not burning all the fuel, will allow unburned or excess fuel to enter the exhaust system. When this excess or unburned fuel contacts the hot core of the converter it will ignite. This constant infusion of unburned fuel will cause temperatures to continuously rise above the designed operating temperature until the core of the catalytic converter will actually melt. Possible causes for the excess fuel entering the exhaust system are an incorrect fuel mixture, incorrect timing, corroded spark plugs, worn and cracked ignition wires, improper fuel pressure, a faulty oxygen sensor, sticking float, faulty fuel injector or a malfunctioning check valve.
    <font size="2" face="Verdana, Helvetica, sans-serif">So it looks like that answers the question of whether or not you're running rich or lean. If I had to put my money on it, I'd say you were running rich, and this richness destroyed your cat.

    <font color="#a62a2a" size="1">[ December 20, 2004 01:14 PM: Message edited by: 01TypeR ]</font>

  3. #3
    Senior Hostboard Member JRCivic's Avatar
    Join Date
    January 13th, 2000
    Posts
    3,835
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Wink

    Well said...
    That is where I would begin looking.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •